Implementation Renewal: 1300 179 568

RIIWHS302D

Implement Traffic Management Plan - Renewal

RTO: 40840

Traffic Management Implementation - Renewal Course


Overview/Content
1. Plan and prepare to implement traffic management plan 1.1 Access, interpret and apply traffic management documentation and ensure the work activity is compliant 1.2 Obtain, read, interpret, clarify and confirm work requirements 1.3 Identify, address and report potential risks, hazards and environmental issues and implement control measures 1.4 Select and wear personal protective equipment appropriate for the work activity 1.5 Identify, obtain and implement traffic control signage and devices 1.6 Select, and check for faults, tools and equipment to carry out tasks 1.7 Identify, confirm and apply environmental protection requirements 1.8 Check the designated traffic controllers training and qualifications for currency 1.9 Advise traffic controllers of the traffic flow requirements 2. Set out the traffic guidance scheme 2.1 Select traffic guidance scheme to suit site conditions, traffic volumes and work activities 2.2 Determine and ensure adherence to work schedule, maximum traffic delays, signals and site communications 2.3 Ensure signs and devices are correctly positioned on the approaches to the work area 2.4 Ensure that signs and devices are positioned and displayed on each approach 2.5 Ensure signs and devices are positioned and displayed laterally 2.6 Ensure traffic is controlled effectively to protect the work crew 3. Monitor traffic guidance scheme 3.1 Ensure traffic flow is monitored and effectiveness of guidance scheme determined 3.2 Monitor work activities and provide guidance to adjust scheme 3.3 Apply process for dealing with traffic controllers who fail to adhere to approved procedures 3.4 Apply procedures to deal with offending motorists 4. Close down traffic guidance scheme 4.1 Ensure traffic is controlled to protect work crew removing traffic control devices 4.2 Ensure signs are removed in sequence to provide maximum warning during removal 4.3 Ensure guidance scheme details are recorded and reported as required 4.4 Ensure incidents are recorded and reported as required 5. Clean up 5.1 Ensure work area is appropriately cleared 5.2 Ensure tools and equipment are cleaned, checked, maintained and stored

Learning Objectives
The purpose of this course is to provide the participant with the knowledge and skills they need to read, interpret, and implement traffic management plans and install/remove signs and devices in accordance with procedures set out in the Manual of Uniform traffic Control Devices Part 3 ( MUTCD ). In addition to those in Traffic Control, it is ideal for individuals who work on or near a road and is required under Workplace Health and Safety before placing signs and devices on a road.

Prerequisites
To be eligible to attend the Implement Traffic Management Plan Renewal training course a participant must provide the following BEFORE attending the theory course: - Provide evidence of current qualifications: Copy of TMI Card and TMI Statement of Attainment - Provide a completed Currency of Industry Practice ( COIP ) Form - Provide Certificates of Completion for Working in Proximity to Traffic Parts 1 and 2 You will also need the following: - Hold QLD White Card or industry equivalent requirement - Possess an Australian Core Skills Framework ( ACSF ) level of language, literacy and numeracy ( LLN ) of at least 2 - Obtain a Unique Student Identifier ( USI ). If you do not have a USI, you will be unable to receive a Statement of Attainment or a Certificate of Completion for the course. Create your USI by * going to Click here

Delivery Mode
Theory: 8 hours ELearning: Students must complete the TMR's WPT Part 1 and 2 eLearn programs

Qualification Issued
Once the student has successfully completed the program, including meeting the evidence requirements in the Currency of Industry Practice, they will be awarded the following: • RIIWHS302D Implement traffic management plan - Certificate of Currency ( COC ) • RIIRIS301D Apply risk management processes - Statement of Attainment • Students will also receive a numbered TMR Traffic Management Implementation card, valid for three years from the date of the program completion. PLEASE NOTE that attainment of this qualification does not allow candidates to operate a Stop/Slow bat. Candidates must complete a separate course, "RIIWHS205D Operate a Stop Slow Bat", and successfully obtain a Traffic Controllers licence from Queensland Transport before they can stop traffic.

Certificate Validity
TMR Traffic Management Implementation card is valid for three years from the date of the program completion.

More About This Course
What you need to bring on the day: - Identification ( Drivers Licence & White Card ) - Full PPE ( long-legged pants, Long-sleeve Hi-Vis shirt, Hard hat with brim, steel capped boots ) - USI Number ( see prerequisites )





Course Timetable

Traffic Management Implementation - Practical Course Timetable

LocationCourse TitleTraining BeginsSeats LeftPrice
AUD (ex GST)
 
KIPPA-RING, QLD
TMP Depot

TMP Depot
Unit 6, 180 Anzac Avenue
Kippa-Ring QLD 4021
Australia

RIIWHS302D Implement traffic management planFri, 8 May 2020
07:00am
6150.00
KIPPA-RING, QLD
TMP Depot

TMP Depot
Unit 6, 180 Anzac Avenue
Kippa-Ring QLD 4021
Australia

RIIWHS302D Implement traffic management planFri, 5 Jun 2020
07:00am
6150.00
KIPPA-RING, QLD
TMP Depot

TMP Depot
Unit 6, 180 Anzac Avenue
Kippa-Ring QLD 4021
Australia

RIIWHS302D Implement traffic management planFri, 19 Jun 2020
07:00am
6150.00
KIPPA-RING, QLD
TMP Depot

TMP Depot
Unit 6, 180 Anzac Avenue
Kippa-Ring QLD 4021
Australia

RIIWHS302D Implement traffic management planFri, 3 Jul 2020
07:00am
6150.00
KIPPA-RING, QLD
TMP Depot

TMP Depot
Unit 6, 180 Anzac Avenue
Kippa-Ring QLD 4021
Australia

RIIWHS302D Implement traffic management planFri, 31 Jul 2020
07:00am
6150.00
KIPPA-RING, QLD
TMP Depot

TMP Depot
Unit 6, 180 Anzac Avenue
Kippa-Ring QLD 4021
Australia

RIIWHS302D Implement traffic management planFri, 14 Aug 2020
07:00am
6150.00
KIPPA-RING, QLD
TMP Depot

TMP Depot
Unit 6, 180 Anzac Avenue
Kippa-Ring QLD 4021
Australia

RIIWHS302D Implement traffic management planFri, 28 Aug 2020
07:00am
6150.00
KIPPA-RING, QLD
TMP Depot

TMP Depot
Unit 6, 180 Anzac Avenue
Kippa-Ring QLD 4021
Australia

RIIWHS302D Implement traffic management planFri, 11 Sep 2020
07:00am
6150.00
KIPPA-RING, QLD
TMP Depot

TMP Depot
Unit 6, 180 Anzac Avenue
Kippa-Ring QLD 4021
Australia

RIIWHS302D Implement traffic management planFri, 25 Sep 2020
07:00am
6150.00
KIPPA-RING, QLD
TMP Depot

TMP Depot
Unit 6, 180 Anzac Avenue
Kippa-Ring QLD 4021
Australia

RIIWHS302D Implement traffic management planFri, 9 Oct 2020
07:00am
150.00
KIPPA-RING, QLD
TMP Depot

TMP Depot
Unit 6, 180 Anzac Avenue
Kippa-Ring QLD 4021
Australia

RIIWHS302D Implement traffic management planFri, 23 Oct 2020
07:00am
6150.00
KIPPA-RING, QLD
TMP Depot

TMP Depot
Unit 6, 180 Anzac Avenue
Kippa-Ring QLD 4021
Australia

RIIWHS302D Implement traffic management planFri, 6 Nov 2020
07:00am
16150.00
KIPPA-RING, QLD
TMP Depot

TMP Depot
Unit 6, 180 Anzac Avenue
Kippa-Ring QLD 4021
Australia

RIIWHS302D Implement traffic management planFri, 20 Nov 2020
07:00am
6150.00
KIPPA-RING, QLD
TMP Depot

TMP Depot
Unit 6, 180 Anzac Avenue
Kippa-Ring QLD 4021
Australia

RIIWHS302D Implement traffic management planFri, 4 Dec 2020
07:00am
6150.00
KIPPA-RING, QLD
TMP Depot

TMP Depot
Unit 6, 180 Anzac Avenue
Kippa-Ring QLD 4021
Australia

RIIWHS302D Implement traffic management planFri, 18 Dec 2020
07:00am
6150.00
 

Course Resources